The new behavior is basically this:
1) Local repos are installed same as before.
2) Multilib configs are now handled only if they exist. They follow
a naming system repos-{local,remote}-ARCH-multilib.conf.
3) Remote repo files follow naming repos-remote-ARCH.conf. If that
does not exist, repos-remote.conf or repos-remote-musl.conf is
used instead (fallback).
4) Cross follows the same behavior, just without multilib.
[ci skip]
That means instead of having a single hostdir/repocache, there
is now hostdir/repocache-$XBPS_TARGET_MACHINE.
This solves multiple problems:
1) When cross-compiling for different architectures and the repos
for host and target differ, you will not get signature/checksum
conflicts for noarch packages.
2) The clean-repocache command will not delete noarch packages that
don't belong to that architecture.
3) Clean mixing of glibc and musl masterdirs with the same hostdir
is now possible; even when building natively, the musl masterdir
will use its repocache-foo-musl, while the glibc masterdir will
use repocache-foo.
[ci skip]
The problem here is that newly introduced behavior in commit
b2b0409be4 resulted in builddir and
destdir *always* being removed when starting a build, as a part of
masterdir auto-update. We don't want this as we may want to resume
a previous build (e.g. by running stages individually or by resuming
a failed build from where it stopped).
Therefore, explicitly override the removal to restore previous behavior.
If `etc/xbps.d/custom` exists (directory) and contains
xbps.d(5) .conf files, those will be copied verbatim
to `masterdir/etc/xbps.d`.
This allows you to set your custom xbps.d(5) settings
without having to modify any other file.
This is also useful for testing xbps.d(5) noextract feature.
There may be /etc/xbps.d/*remote* config files dangling from a previous
run w/o XBPS_SKIP_REMOTEREPOS being set. Make sure to remove them
in case $XBPS_SKIP_REMOTEREPOS is set for this run.
This patchset contains multiple changes to xbps-src and
its required package "base-chroot" for building packages
via chroot.
- moved xbps.d(5) conf files to `etc/xbps.d`.
- renamed xbps.d(5) repository files to `etc/xbps.d/repos-{local,remote}*`.
- do not set `--repository` to any xbps command that supports it,
xbps-src now simply populates `rootdir/etc/xbps.d` with correct
settings (taking care of CHROOT_READY/IN_CHROOT).
- Unless `-C` is set (to preserve builddir/destdir/autodeps), when
entering to the chroot (if CHROOT_READY is set), xbps-src will
clean up the masterdir and then perform a system update to always
use a constant set of packages for that exact date.
- Improved some normal/error msgs.
- Includes support for `xbps>=0.58`.
- common/hooks: switch to bsdtar.
- base-chroot:
- base-chroot-musl is gone, now unified for glibc/musl.
- deps removed: gettext, mpfr, readline, texinfo, which, xz.
- deps changed: tar -> bsdtar.
Effectively this reduces dependencies in `base-chroot`, makes
it unified for musl and glibc, switches xbps-src to use `bsdtar`
rather than GNU `tar` and `xz`, gets rid of useless host dependencies
like GNU gettext, texinfo, etc.
I've been testing these changes for 1 month or so already,
I was able to build from scratch `base-system` for both native
and multiple targets, i.e `./xbps-src -a target -Nt pkg base-system`
Previously, xbps-src would try to find checksums in template files
and not purge those found but it actually ignored everything that
had the checksums specified on multiple lines.
The reason for this is that the bash 'read' builtin reads until it
finds a newline, and if you specify multiple checksums on multiple
lines rather than on one line it would ignore all but the first.
Fix this by replacing newlines with spaces, so that it can properly
read all checksums into an array.
As reported by @pullmoll via https://github.com/void-linux/xbps/issues/190
the culprit is this assignment, rather than in the xbps code.
Tested with local and remote repos, no regressions found.
This should restore sort-dependencies behavior back to its former
behavior of not including all of the build dependencies not in
the input list in its listing.
$rval was the return code of pkg_available and not of build.sh, since
pkg_available returns 0. because of this install_cross_pkg() would
always return 0 for success.
Provide new environment variables for simplifaction of template checks:
...ENDIAN defines the (target) machine's endianness: "le" or "be".
...LIBC defines the (target) machine's C library: "glibc" or "musl".
Closes: #13356
Signed-off-by: Jürgen Buchmüller <pullmoll@t-online.de>
- use xbps-checkvers(1) to resolve dependencies.
- all dependencies are installed at once for the host and target.
- the show-build-deps target is now much faster.
- the update-bulk/show-repo-updates targets are now much faster.
- the update-sys/show-sys-updates targets are now much faster.
- the bootstrap target now works on musl hosts.
- simplified some loops.
- use cut(1) rather than awk(1) where applicable.
- multiple random changes to improve performance.
Based on work started by @Duncaen on #12433Close#12433Close#11282
- use xbps-checkvers(1) to resolve dependencies.
- all dependencies are installed at once for the host and target.
- the `show-build-deps` target is now much faster.
- the `update-bulk/show-repo-updates` targets are now much faster.
- the `update-sys/show-sys-updates` targets are now much faster.
- the `bootstrap` target now works on musl hosts.
- simplified some loops.
- use cut(1) rather than awk(1) where applicable.
- multiple random changes to improve performance.
Based on work started by @Duncaen on https://github.com/void-linux/void-packages/pull/12433
Close https://github.com/void-linux/void-packages/pull/12433
Close https://github.com/void-linux/void-packages/pull/11282
Due to -I it cannot return EEXIST, and this error value shall
be treated as a real error.
Does not change the current behaviour but will do if we drop -I.
Build dependencies are now installed with -I, --ignore-file-conflicts.
A new option introduced in xbps-0.55 that just prints
conflicting files but does not error out.
Switch to xbps-fetch and xbps-digest.
if xbps-install(1) returns EEXIST, treat it as an error,
do not ignore it.
xbps-install(1) now returns only EEXIST for file conflicts
in transaction, so that it should not be ignored.
* KDE distfile storage is based on versionned "folder".
An existing folder_version does not mean that the corresponding
distifile exists, so let's check its existence.
* wider scope for KDE urls that will use that rule.
Fine for plenty other packages, except kdb that don't follow
this hierarchy (yet)
* noarch=yes is replaced with archs=noarch
* only_for_archs= is renamed to archs=
* archs= allows the use of wildcards and negations; first matching rule applies:
* archs="*-musl" will build the pkg only for musl-libcs
* archs="~*-musl" will build the pkg only on non-musl-libc
* archs="x86_64-musl ~*-musl" will build for x86_64-musl and any non-musl
arch.
* archs= defaults to "*"
try to match the whole line from
href="/gems/${pkgname#ruby-}/versions/[VERSION NUMBERS]"
matching until the quote avoids problems like the travis gem that has
special versions like
1.8.10.travis.921.11
before it would match until 1.8.10., now it doesn't match.
To catch all SHA256 hashes from a template, even the ones which
are used only under certain preconditions, use grep [0-9a-f]{64} to
find all hashes in a template.
The may be some false positives which does not hurt the intended
purpose to purge obsolete distfiles.
Signed-off-by: Jürgen Buchmüller <pullmoll@t-online.de>
This commits allows ./xbps-src show to show the changelog field and for
changelog to be included with the -c/--changelog option via xbps-create.
Closes: #14102 [via git-merge-pr]
q66
Juan RP
Duncaen
Jürgen Buchmüller
Piotr Wójcik
Stefano Ragni
John
Johannes
Andrew Benson
Doan Tran Cong Danh
maxice8
yopito
Enno Boland
Cameron Nemo
Rasmus Thomsen
newbluemoon
Michael Aldridge
Alessio Sergi
Duncaen
Leah Neukirchen
Juan RP
Michael Gehring