diff --git a/srcpkgs/x13s-base/INSTALL b/srcpkgs/x13s-base/INSTALL
new file mode 100644
index 00000000000..50459153a32
--- /dev/null
+++ b/srcpkgs/x13s-base/INSTALL
@@ -0,0 +1,9 @@
+case "$ACTION" in
+post)
+	# assign a random wlan and bluetooth MAC addresses with the correct OUI
+	# as the firmware doesn't support saving this
+	sed -i -e "s/:UU:VV:WW/$(od -An -N3 -t x1 /dev/urandom | tr ' ' ':')/g" \
+		-e "s/:XX:YY:ZZ/$(od -An -N3 -t x1 /dev/urandom | tr ' ' ':')/g" \
+		etc/default/x13s
+	;;
+esac
diff --git a/srcpkgs/x13s-base/files/72-touchscreen.rules b/srcpkgs/x13s-base/files/72-touchscreen.rules
new file mode 100644
index 00000000000..c0a1cb63749
--- /dev/null
+++ b/srcpkgs/x13s-base/files/72-touchscreen.rules
@@ -0,0 +1 @@
+ACTION=="add" , RUN+="/bin/sh -c 'echo 4-0010 > /sys/bus/i2c/drivers/i2c_hid_of/bind'"
diff --git a/srcpkgs/x13s-base/files/90-bt-address.sh b/srcpkgs/x13s-base/files/90-bt-address.sh
new file mode 100644
index 00000000000..a0273efbb06
--- /dev/null
+++ b/srcpkgs/x13s-base/files/90-bt-address.sh
@@ -0,0 +1,2 @@
+msg "Setting bluetooth MAC address..."
+/usr/libexec/x13s-setup bluetooth
diff --git a/srcpkgs/x13s-base/files/90-net-address.rules b/srcpkgs/x13s-base/files/90-net-address.rules
new file mode 100644
index 00000000000..1c50a4a2e45
--- /dev/null
+++ b/srcpkgs/x13s-base/files/90-net-address.rules
@@ -0,0 +1 @@
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0006:01:00.0", RUN+="/usr/libexec/x13s-setup wlan $name"
diff --git a/srcpkgs/x13s-base/files/dracut.conf b/srcpkgs/x13s-base/files/dracut.conf
new file mode 100644
index 00000000000..a24acfa3d0a
--- /dev/null
+++ b/srcpkgs/x13s-base/files/dracut.conf
@@ -0,0 +1,6 @@
+force_drivers+=" nvme phy_qcom_qmp_pcie "
+# keyboard
+force_drivers+=" i2c_hid_of i2c_qcom_geni "
+# display
+force_drivers+=" leds_qcom_lpg pwm_bl qrtr pmic_glink_altmode gpio_sbu_mux panel_edp msm "
+force_drivers+=" phy_qcom_qmp_combo pinctrl_sc8280xp gpucc_sc8280xp dispcc_sc8280xp phy_qcom_edp "
diff --git a/srcpkgs/x13s-base/files/mkinitcpio.conf b/srcpkgs/x13s-base/files/mkinitcpio.conf
new file mode 100644
index 00000000000..a428eefb201
--- /dev/null
+++ b/srcpkgs/x13s-base/files/mkinitcpio.conf
@@ -0,0 +1,6 @@
+MODULES+=(nvme phy_qcom_qmp_pcie)
+# keyboard
+MODULES+=(i2c_hid_of i2c_qcom_geni)
+# display
+MODULES+=(leds_qcom_lpg pwm_bl qrtr pmic_glink_altmode gpio_sbu_mux panel_edp msm
+ phy_qcom_qmp_combo pinctrl_sc8280xp gpucc_sc8280xp dispcc_sc8280xp phy_qcom_edp)
diff --git a/srcpkgs/x13s-base/files/x13s-setup b/srcpkgs/x13s-base/files/x13s-setup
new file mode 100644
index 00000000000..ce0872e83d8
--- /dev/null
+++ b/srcpkgs/x13s-base/files/x13s-setup
@@ -0,0 +1,18 @@
+#!/bin/sh
+# x13s-setup wlan <interface>
+# x13s-setup bluetooth
+
+[ -r /etc/default/x13s ] && . /etc/default/x13s
+
+case "$1" in
+wlan)
+	if [ -n "$WLAN_MAC" ] && command -v ip >/dev/null 2>&1; then
+		exec ip link set dev "$2" address "$WLAN_MAC"
+	fi
+	;;
+bluetooth)
+	if [ -n "$BLUETOOTH_MAC" ] && command -v btmgmt >/dev/null 2>&1; then
+		exec btmgmt --index 0 public-addr "$BLUETOOTH_MAC"
+	fi
+	;;
+esac
diff --git a/srcpkgs/x13s-base/files/x13s.default b/srcpkgs/x13s-base/files/x13s.default
new file mode 100644
index 00000000000..1350a65c7b6
--- /dev/null
+++ b/srcpkgs/x13s-base/files/x13s.default
@@ -0,0 +1,7 @@
+# the X13s' wlan and bluetooth firmware/hardware do not support
+# storing their default MAC address, so it must be set on boot
+# by default, these are set to a random MAC address with the
+# correct vendor prefix (OUI) of F4:A0:0D. These MAC addresses
+# can also be assigned manually by editing this file.
+WLAN_MAC="F4:A0:0D:UU:VV:WW"
+BLUETOOTH_MAC="F4:A0:0D:XX:YY:ZZ"
diff --git a/srcpkgs/x13s-base/template b/srcpkgs/x13s-base/template
new file mode 100644
index 00000000000..17da5ee388c
--- /dev/null
+++ b/srcpkgs/x13s-base/template
@@ -0,0 +1,22 @@
+# Template file for 'x13s-base'
+pkgname=x13s-base
+version=1
+revision=1
+archs="aarch64*"
+depends="linux-mainline>=6.8 linux-firmware-qualcomm alsa-ucm-conf"
+short_desc="Void Linux Thinkpad X13s platform package"
+maintainer="classabbyamp <void@placeviolette.net>"
+license="Public Domain"
+homepage="https://www.voidlinux.org"
+conf_files="/etc/default/x13s"
+
+do_install() {
+	vinstall "${FILESDIR}"/72-touchscreen.rules 644 usr/lib/udev/rules.d 72-x13s-touchscreen.rules
+	vinstall "${FILESDIR}"/90-net-address.rules 644 usr/lib/udev/rules.d 90-x13s-net-address.rules
+	vinstall "${FILESDIR}"/90-bt-address.sh 644 etc/runit/core-services 90-x13s-bt-address.sh
+	vinstall "${FILESDIR}"/dracut.conf 644 usr/lib/dracut/dracut.conf.d x13s.conf
+	vinstall "${FILESDIR}"/x13s-setup 755 usr/libexec
+	vinstall "${FILESDIR}"/x13s.default 644 etc/default x13s
+	# not currently working
+	# vinstall "${FILESDIR}"/mkinitcpio.conf 644 etc/mkinitcpio.conf.d x13s.conf
+}